CycleOps Jet Fluid Pro vs Fluid 2

With a bike trainer, you can keep training your bicycling skills and maintain your fitness even if the weather is bad outside. However, choosing the right bike trainer is not an easy task. Below, we will help you choose between two of the most popular models from CycleOps in the market, CycleOps Jet Fluid Pro vs Fluid 2.

Continue reading to find out further about:
– Which model that is more portable and space-friendly
– Which model that is generally easier to use
– The compatible bikes that can work with each model
– The comparison of their noise levels
– The performance of CycleOps Jet Fluid Pro vs Fluid 2
– Which model that is more recommended for the money

Portability
The first notable distinction between these two models is the portability. Although both CycleOps Jet Fluid Pro and CycleOps Fluid 2 are generally portable and quite easy to move around, there are some differences in the dimensions and design. CycleOps Jet Fluid Pro is more portable than CycleOps Fluid 2. See also: TRX Home vs Pro.

CycleOps Jet Fluid Pro has one special feature that greatly enhances its portability. It has a fold-flat frame design. So, when it is not in use, you can fold the whole thing into a perfectly compact and flat form. Then, you can store it in your bag, cupboard, or any spare space that you have under your bed. Not to mention that it is among the most lightweight models in the market, with a weight of only about 24.3 pounds.

Thanks to the highly portable design, CycleOps Jet Fluid Pro is a great choice not only for a home with a strict space limitation. It is also a highly recommended choice if you are looking for a bike trainer that you can bring along when traveling. Or, you can bring it along to bicycling events for warmups.

CycleOps Fluid 2 on the other hand, comes with a classic foldable frame. Actually, you can also fold this bike trainer when it is not in use. However, it doesn’t fold into a completely flat form. Also, the folding mechanism requires a little bit more time and effort.

This model is slightly heavier at about 27 pounds. To be fair, although CycleOps Fluid 2 is not as portable as its sibling here, it is still quite practical to use. So, bringing it along to trips and events is not impossible at all.

Ease of Use
The next thing that you may need to consider when choosing between CycleOps Jet Fluid Pro vs Fluid 2 is the ease of use. Again, both models here are generally easy and practical to use. But you will probably lean more towards CycleOps Jet Fluid Pro than CycleOps Fluid 2 if you are looking for the most convenient bike trainer.

CycleOps Jet Fluid Pro will come pre-assembled right out of the box. So, you won’t need to do any manual set-up. The whole thing does not need any electricity in order to run because it is fluid-based. You only need to take it out of the box, unfold it, and put your bike on it. Using trainer tires is recommended for the best performance. The bike trainer also has a quick-release clamp mechanism which is really easy to use.

CycleOps Jet Fluid Pro has a support leg with an adjustable height, so you can use the bike trainer safely on an uneven surface. This is a very nice feature, as not many models in the market have it. The clutch knob will give an audible click once you have reached the perfect tension between the rear wheel and the resistance unit, so you won’t over-tension or under-tension the resistance unit.

CycleOps Fluid 2 will come in parts and pieces that you need to set up by yourself. The included user manual is fortunately clear and easy to follow. You won’t have any problem in the assembly if you are used to such technical tasks. The bike trainer also has a clamp to secure the bike in place.

CycleOps Fluid 2 also has the same clutch knob, which will ensure that you will always get the right tension from the resistance unit. The footpads are adjustable so that you can have a relatively stable ride on most surfaces, but it is without the height adjustment.

Compatibility
When choosing between CycleOps Jet Fluid Pro vs Fluid 2, you also need to check what bikes that are compatible with these trainers. Otherwise, if your bike is incompatible with the trainer that you choose, it will be pretty much useless.

CycleOps Jet Fluid Pro has a one-sided frame mount for quick placement and removal. This frame has been designed to fit most road bikes and mountain bikes. Unfortunately, it won’t allow you to use a bike with a 120mm rear dropout spacing.

The bike trainer also has an optional thru-axle adapter for 142x12mm bikes. But the compatibility is not as vast as CycleOps Fluid 2. CycleOps Jet Fluid Pro can be used with 26”, 27”, 29”, 650b, and 700c wheel sizes. The maximum tire width is 2.25 inches, but don’t forget to consider the tire tread as well. The maximum load weight rating is 300 lbs, but keep in mind that the load weight takes the rider and the bike into account.

CycleOps Fluid 2 has a steel quick-release skewer which can fit most road bikes and mountain bikes. It has three selectable settings for a rear dropout spacing, which are 120mm, 130mm, and 135mm. In addition, the optional thru-axle adapter is suitable for 142x12mm and 148x12mm bikes.

So, this bike trainer can work with a wider range of bikes. It is a viable choice if your bike has a rear dropout spacing. It can be used with 26”, 27”, 29”, 650b, and 700c wheel sizes. However, the maximum tire width allowed is only 2.0 inches. The maximum load weight (rider + bike) of this bike trainer is also 300 lbs – which should be sufficient for most people.

Noise
If you want to train at home without disturbing your family members or the neighbors, you are probably looking for a quiet bike trainer. There is a slight difference in the noise of CycleOps Jet Fluid Pro vs CycleOps Fluid 2. This time, the advantage goes to the latter model.

CycleOps Jet Fluid Pro is somewhat noisy. When it is running at 20 mph, the generated noise is about 70 – 71 decibels. As a comparison, a normal conversation noise level is about 60 decibels. So, it is actually not too noisy. It is just slightly audible from other nearby rooms.

CycleOps Fluid 2 is quiet. When running at 20 mph, the generated noise is only about 64 – 68 decibels. So, it is just slightly louder than normal conversation. You can train without disturbing the neighborhood – perhaps a major advantage if you are living in an apartment or dorm.

Performance
Performance-wise, CycleOps Jet Fluid Pro and CycleOps Fluid 2 are really similar. They are made by using the PowerTuned technology to ensure the best road-like feel and realistic performance.

The resistance depends on the speed of the drum. The resistance is increased by a faster speed. If you shift to a higher gear, the resistance will increase. Vice versa, shifting to a lower gear will lower the resistance.

Each model here uses a 4.1-lb flywheel which is pretty good. There are some other models out there with heavier flywheels, hence offering smoother performance, but CycleOps Jet Fluid Pro and CycleOps Fluid 2 are already really good. The changes in resistance feel quite smooth and natural.

One special feature of CycleOps Fluid 2 that enhances its performance is the self-cooling mechanism. It has a proprietary fan design which will prevent the unit from overheating quickly. Thanks to this feature, the bike trainer can provide consistent performance over an extended training session.

Warranty
Finally, let’s take a look at the warranty information. Always check the warranty before purchasing a product. Although the manufacturer is known for their excellent product quality, you never know when you will get defective parts or materials. Having a solid warranty can give you some peace of mind.

And, of course, one of the very best thing about CycleOps is their lifetime warranty. Both CycleOps Jet Fluid Pro and CycleOps Fluid 2 are backed by a lifetime warranty which will cover the frame. The warranty is valid for as long as you own the unit.

However, the resistance unit only has a 2-year warranty. Not included in the warranty are the finish and decals, clutch knob, and bolts. The frame warranty and the resistance unit warranty are only valid for personal use. If the bike trainer is used for a commercial purpose, the frame is only warrantied for 5 years, and the resistance unit is not warrantied.

Still, the customer support is very good. They won’t ask many questions when you make a warranty claim. They are responsive, and will give the suitable replacement right away.

CycleOps Jet Fluid Pro vs Fluid 2

- JetFluid Pro trainer gives you the most realistic ride a trainer can offer.
- PowerTuned technology provides smooth, realistic accelerations and inertia offering real-world feel.
- Road-like performance - pure and simple.
 
- Made from rugged 2-inch round 16-gauge steel
- Comes with a lifetime warranty from cycleOps
- Adjustable footpads for a stable ride on most surfaces
 

Conclusion
Although CycleOps Jet Fluid Pro is portable and very easy to use, CycleOps Fluid 2 is generally more recommended. It also has a foldable design. The major advantages are the wider bike compatibility, the self-cooling mechanism, and the quiet performance. It will deliver a more consistent performance during an extended training session.

Leave a Reply

nine − three =